Factory Reset Learnpad Model LPQ-597W

Factory Reset Learnpad Model LPQ-597W

Turn the tablet off.  Wait for 5 seconds.
Press and hold the Volume Down and Power button simultaneously. Continue to hold these buttons until the screen turns on - when it does, release Power but continue holding Volume Down.
Once "No Command" appears on the screen

Press Volume Up and Power simultaneously. The Android system recovery screen displays (if it doesn't, just press the combination again).

Use Volume Down to scroll to wipe data/factory reset. Press the Power button.

Use Volume Down to scroll to Yes. Press the Power button.
Once the process completes, you will return to the Android system recovery screen.

Press Power to reboot the device.
Once the learnpad has booted back up scan in the WiFi and proxy (if you use one) QR codes to get the Learnpad back on your network.

    • Related Articles

    • Factory Reset Learnpad Model LPQ-497W5V

      Turn the device off. Wait 5 Seconds. Press and hold the power and home simultaneously. Hold them both for about 8 seconds then release the power button and Continue to hold the home button it will turn on and you see the learnpad logo continue ...

    • LearnPad Factory Reset Procedure Workbook

      LearnPad Factory Reset Procedure Workbook Model LPW1101B / LPW2101B Turn the Workbook off. Press and hold the Volume Down (Volume Up for LPW2101B) and Power button simultaneously. Continue to hold these buttons until the screen turns on - when it ...

    • Factory Reset LPO-478WD

      Make sure the device model number LPO-478WD  is switched off. Hold down the power and volume down button until you see the Learnpad logo then release the buttons The system recovery menu will appear. Use the volume up/down button to scroll through ...

    • Decimo 250W Factory Reset

      Turn the Decimo off. Press and hold power button and volume UP simultaneously. When the menu appears- release both buttons. Using ONLY volume UP select "recovery mode", use volume down to confirm.   You will get LP logo and then Android "No command" ...

    • Learnpad Access Stock Android Launcher

      To access the stock Android Launcher on your LearnPad tablets, simply take the following steps: 1. Tap the padlock to unlock LearnPad as the Super Administrator (please contact support if you need this password). Please note that this step is ...