Switching on & off
April 16, 2014
Power Controls
The exact instructions may differ slightly depending upon the age and type of LearnPad you are using. If you require additional assistance, please contact us.
Switching On
To switch LearnPad on quickly press and release the power button. This will be located on the side or the top of your tablet.
If LearnPad was asleep, the screen will turn on and display the last application you were using.
If the screen did not turn on this indicates that LearnPad was off. Press and hold the power button until LearnPad starts to boot up, which will be indicated by a sequence of pictures like these.
Once LearnPad has fully started up you will see the current Lesson (if one is installed).
If no lesson is installed you will see help screen:
Switching Off
Quickly press and release the power button to put LearnPad to sleep. In sleep mode LearnPad uses very little power. Unless you do not intend to use the device for a long period, there is usually no reason to turn LearnPad completely off.
If you want to turn LearnPad completely off, hold down the power button until a Power off message appears. Tap this, and then tap OK.
Troubleshooting
LearnPad won’t turn on. Ensure LearnPad has power by plugging it in and checking that the screen comes on.
LearnPad won’t turn on or off. You can do a “hard reset” by holding the power button for about ten seconds, which should turn LearnPad completely off. LearnPad should now come on with a long press (6 seconds) of the power button.
Related Articles
Factory Reset Learnpad Model LPQ-497W5V
Turn the device off. Wait 5 Seconds. Press and hold the power and home simultaneously. Hold them both for about 8 seconds then release the power button and Continue to hold the home button it will turn on and you see the learnpad logo continue ...Factory Reset Learnpad Model LPQ-597W
Turn the tablet off. Wait for 5 seconds. Press and hold the Volume Down and Power button simultaneously. Continue to hold these buttons until the screen turns on - when it does, release Power but continue holding Volume Down. Once "No Command" ...Switching Lessons
The Resources on LearnPad are grouped into Lessons, which can be swapped per-device to suit the lesson plan. The current Lesson can be changed from LearnPad itself using a QrKey or via the ClassConnect portal. Changing Lessons from LearnPad 1. Find ...Switching on & off
April 16, 2014 Power Controls The exact instructions may differ slightly depending upon the age and type of LearnPad you are using. If you require additional assistance, please contact us. Switching On To switch LearnPad on quickly press and release ...Switching Organisations
July 10, 2014 Users who are members of multiple organisations or who manage accounts that have subordinate organisations, can switch between the organisations they manage by clicking the pencil icon next to their organisation name at the top right ...