LearnPad Tablets for Schools: Device Usage Unlocking LearnPad

Unlocking LearnPad

April 22, 2014

LearnPad can be in one of three lock modes:
  • Locked (Student Mode): Where only the LearnPad interface is visible and only approved resources are available.
  • Unlocked (Teacher Mode): Where a dedicated Teacher category is available and no application or website blocking is applied.
  • Unlocked (Admin Mode): Where LearnPad can be used as a fully-functional Android tablet. The secure LearnPad interface can be relaunched at any time and quickly locked.
The lock status of LearnPad is indicated by the padlock icon at the top of the screen.

Locked (Closed Padlock):


Unlocked (Open Padlock):


When unlocked in Admin Mode tapping the home button  will allow you to choose to access LearnPad or the standard Android launcher:



Please note: If you select to “Always” use LearnPad, you will only be able to access the standard Android Launcher if you subsequently clear the defaults that have been set in Android settings menu.

Unlocking with a QrKey
You can use the “Login” QrKeys found on the QrKey management page to unlock LearnPad into Teacher or Admin mode simply by scanning the QrKey. A QrKey will be available for each password you have created.

Unlocking with a Password
Tap the closed padlock at the top of the screen and when prompted enter the password for the type of unlock you require:






















The default password to unlock LearnPad in Teacher Mode is 101Teacher, the default password to unlock in Admin mode is 101SuperAdmin.

LearnPad will indicate the new lock status with a message such as “Welcome Teacher”



To lock LearnPad again for students follow the Locking LearnPad guide.

    • Related Articles

    • Locking and unlocking LearnPad

      LearnPad is designed to be used by students in locked mode. When LearnPad is locked, students may only access the contents of the current Lesson and Toolbox, and cannot access the Device Settings. LearnPad can be unlocked as a teacher or as an ...

    • Locking LearnPad

      April 4, 2014 LearnPad can be locked to prevent students from accessing content or settings that have not been authorised by the teacher. When locked LearnPad will block: Websites that have not been authorised. Applications that may already be ...

    • Release Notes 2.3.1.215

      May 20, 2013 Version 2.3.1.215 Added on-the-fly authentication to Remote Storage for authenticated network share browsing Remote commands combined to single polling interface for fast Dashboard synchronization Easy setting of system proxy through ...

    • Factory Reset LPO-478WD

      Make sure the device model number LPO-478WD  is switched off. Hold down the power and volume down button until you see the Learnpad logo then release the buttons The system recovery menu will appear. Use the volume up/down button to scroll through ...

    • Factory Reset Learnpad Model LPQ-497W5V

      Turn the device off. Wait 5 Seconds. Press and hold the power and home simultaneously. Hold them both for about 8 seconds then release the power button and Continue to hold the home button it will turn on and you see the learnpad logo continue ...